 |
 |
| Steel Structures |
|
| Portal Steel Frame |
|
| Tower Construction |
|
| Steel Roof Truss |
|
| Chain Structures |
|
| Flat Chain |
|
| Arc Chain |
|
| Curved Surface Chain |
|
| Net-shell Construction |
|
| Coated Steel Sheet |
|
| Double-deck Compound Sandwich Laminated Zinc Coated Steel Sheet |
|
| Monolayer Formed Coated Steel Sheet |
|
| Equipment |
|
| product line |
|
| Cases |
|
| Case |
|
| Portal Steel Frame |
|
Molecular Formula： It can be used for kinds of building, which includes monospan steel frame, double-span steel frame and multi-span steel frame. Describe：
|
|
| Steel Structures | |
| Steel Structures | |
| Portal Steel Frame It can be used for kinds of building, which includes monospan steel frame, double-span steel frame and multi-span steel frame. It can assemble the crane. Fro portal steel frame light house steel construction, the formed steel sheet and cold bend thin wall purline should be used as the roof. Steel column and steel girder of it should adopt welding H steel, which material are Q235 or Q345. |
|
|
LRF system is rigidity
frame of roof with mild gradient. It adopts the column of
uniform section or the one of
non-uniform section, roof girder with non-uniform
section which is best in design of location. The cost of
material is economical and the middle of the beam is near
horizontal. There is no column inside which enables the
workshop is spacious in span. This system does not need big
space and the roof gradient is mild which decreases the
heating cost of the nonuse space. This system can satisfy all
kinds of buildings and it is the most economic design. |
|
|
Except the characters
of the LRF system, LRFM system has 1 to 5 columns which makes
the workshop more spacious and the allocation of the lines
more compact and efficient. Thus the land of the workshop is
in full use. This design is applicable to warehouse, office
and light industry workshop. Width：1 column: 24--54m; 2 columns: 36--84m 3 columns: 48--108m Brim height：3--9m Roof gradient：1:12 1:16 1:20 Column space：6m 7.5m 8m 9m |
|
|
LP2M system includes
the characters of LP2 system, the ones of LRFM system, and has
rigidity frame. With columns, the business application of it is
more economic in design. It is applicable in warehouse, showroom
and large-scale clothing factory. Width: 1 column: 15--48m; 2 columns: 34--72m; 3 columns: 48--96m Brim height：3.6--7.5m Roof gradient：1:24 1:30 1:36 Column space：6m 7.5m 8m 9m embedded beam Rigidity, attached with the beam |
|
|
LP4M system has all
the characters of LP2M and LP2 which make it with modern outlook
and the minimum roof gradient. It adopts non-bolt roof system,
which performs well in waterproof. Like all the LP with joist
frame and vertical bridle system, it has column space of 12m,
15m or 18m. It is applicable in shopping center, supermarket,
warehouse and office building. Width: 1 column: 15--48m; 2 column: 30--72m, 3 columns: 45--96m Brim height：3.7--7.5m Roof gradient：1:48 Column space：6m 7.5m 8m 9m embedded beam |
|
|
LSSM system has mild
gradient, with one-way slope and single drainage area. It has
characters of typical beam attached and mini roof Structures,
so it is applicable in shop, simple warehouse and
expanding of the building. The columns can be added in
order to increase the space. Width: no column: 18--25m, 1 column: 18--31m, 2 column: 35--46m, 3 column: 48--61m Brim height：3.7--7.5m Roof gradient：1:48 Column space：6m 7.5m 8m 9m Rigidity, attached with the beam |
